SuperClear® Conical Bottom Tubes
Labcon SuperClear® conical bottom tubes are precision molded with a precisely smooth conical bottom. Perfect for a multitude of general laboratory uses. Our conical bottom tubes have thicker walls for greater strength in handling and centrifuging. A screw cap with liner seals these tubes liquid tight. These tubes are made from 100% virgin Class VI medical grade resin so you can be sure there is no contamination from the use of commodity grade plastics.
Unlike other lesser tubes our SuperClear® conical bottom tubes are lot tested and certified free of detectable Nuclease, Endotoxin, and ATP contamination.
Superb Clarity. Unsurpassed Purity.
SuperClear® conical bottom tubes feature a higher spin rate and USP class IV resins to ensure your work is safe and repeatable. Labcon SuperClear® Tubes have a easy to use self-threading screw caps for one hand use while pipetting. Molded in place graduations allow a quick check of volumes. Like all our disposables these tubes were developed using our own in-house laboratory and tested in real labs.
SuperClear® conical bottom tubes are available in oriented pack in both sterile and non-sterile versions. And in Loose bags. All our sterile products use medical grade packaging and are radiation sterilized following a validated ISO 11137 medical grade method to a sterility assurance level of 10-6.
SuperClear® conical bottom screw cap tubes feature an extra thick and durable wall that can withstand centrifugation to 3,000 x G. The ultra clear resins gives you a clear view of your sample as well as correct color rendition. These tubes are free of endotoxin so are perfect for cell culture. Tubes are graduated from 2ml to 15ml.
Available in a 15mL size that fits all standard and rotors and storage racks. Polystyrene tubes are not autoclavable. Available in medical grade sterile packages that are not restricted to research use only.
 |
Endotoxin Free (Non pyrogenic) Product samples are exposed to endotoxin-free water and the resulting extraction fluid is tested for contamination using the kinetic turbidimetric Limulus Amoebocyte Lysate (LAL) assay protocol and USP guidelines. All products tested must display less than 0.05 EU/ml to be certified free of endotoxin. |
 |
Nuclease Free (RNase/DNase) Product samples are exposed to nuclease-free water and the resulting extraction fluid is tested for nuclease activity on commercially available 7.5 kb Poly(A) tailed RNA (1µg) and HindIII-digested DNA (1µg) with a one hour 37°C incubation in appropriate buffers. Results are visualized on an agarose gel with appropriate positive and negative controls. Extraction fluid samples must show no degradation of the nucleic acids by the extraction fluid has occurred for the product to be certified as RNase-free and DNase-free |
 |
Adenosine Triphosphate (ATP) Product sample surfaces are tested for the presence of adenosine triphosphate (ATP) using a controlled bioluminescence reaction to detect contamination. Luminescence data is compared to results generated by ATP-free surfaces and surfaces with known amounts of ATP as a positive control. The relative light units result must indicate less than 2 X 10-12 mg/µl of ATP for the product to be certified as ATP free. |
 |
Heavy Metals Free Heavy metals have been tested for using the prescribed USP method and confirmed to have levels lower than 1 part per million (1ppm) |
 |
Validated Sterilization Labcon products are sterilized by radiation sterilization within a dose range of 12-35 kGy. The dose range necessary for the stated sterility assurance level is continuously audited through quarterly bio-burden and sterility validation studies performed according to the ANSI/AAMI/ISO 11137 standard by an independent laboratory. This dosage is sufficient to guarantee a sterility assurance level of 10-6. |
 |
Bovine Spongiform Encephalopathy-Transmissible Spongiform Encephalopathy These products contain resins that are processed under conditions proven to exceed the European Union standard as listed in the 22nd Commission Directive EC 98/16/EC of March 5th, 1998 as annexed to council Directive EC 76/768/EEC and further Amendment 419 Annex II of 12 June 2001. |
 |
Medical Grade (USP) U.S Pharmacoepia Methods and Guidelines (U.S.P Class VI) are used if applicable. We only use medical grade resins and pre-test all resins for contaminants prior to use. Resins are compliant with FDA CFR title 21-177.1520, 178.3295, 178.3297. |
 |
California Prop 65 No Labcon manufactured disposables contain any of the “listed chemicals” as referenced in the California Safe Drinking Water and Toxic Enforcement Act of 1986, (Prop 65) as revised May 25, 2018. |
 |
Phthalates & Oleamide All our resins are medical grade and are certified free of Bisphenol A (BPA), Oleamide, DiHEMDA, and Phthalates. |
 |
Substances of Very High Concern & REACH All Labcon products are compliant with RoHS Directive 2002/95/EC/-2011/65-2015/863, are free of Substances of Very High Concern (SVHC), and are EU REACH Regulation (EC) No 1907/2006 compliant. |
 |
Origin These products are Made in USA and all components meet the requirements for US origin under the NAFTA agreement. |
 |
U.S. FDA Registered Labcon is a U.S. FDA registered medical device manufacturer. Our facility is registered by the U.S. government to comply with CFR21 GMP regulations for manufacturing medical devices. |
 |
CE Compliant As applicable Labcon products meet the requirements for CE marking under regulation 2017/746. |
 |
ISO 9001 Quality Registration Labcon has been registered to the ISO 9001 quality management system standar since 1997 and maintains registration to ISO 9001:2015. |
| Material | 100% Virgin Polystyrene |
| Grade | Medical |
| Rating | USP Class VI |
| Color | Clear with Teal or Purple Cap |
| Length | 118mm |
| Fits | Most popular centrifuges and storage racks |
| Approved Use | Medical, Research, Industrial, Food & Beverage |
| Lot Expiration | 6 years |
| Sterile Expiration | 5 years |
Fiber Rack
These patented collapsable recyclable fiber racks hold 25 tubes and can be recycled like standard cardboard. The clean SBS material is printed with numbers at each well for ease of use. A view port in the ends allows you to see the fluid volume when filling one tube. Available sterilized by irradiation.
Loose Pack
Loose pack tubes are supplied in heavy duty medical grade polyethylene bags. Available sterlized by irradiation.
Bulk Box
This package is an inexpensive option when your budget is tight. Tubes are supplied in one large bag inside a corrugated container. We recommend you do not store these tubes for long periods if warping is a concern.
